Dual Arm Monitor Stand for LCD/LED Displays
RHMS-11002
User Manual
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step 1 –Attach base assembly to desk
A : Desk Clamp 0.6"(16mm)<board depth <2.75"(70mm)
2
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
B : Through-Desk 1"(25.4mm)diameter<=2.95"(75mm)
You need disassemble the baseï¼»02ï¼½ assembly at first ,then assembling again according to the
following pic
C: Grommet Hole 2.95"(75mm)<=hole diameter<=3.9"(100mm)
3
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
D: Side Mount
board depth >2.95"(75mm)and no mount hole
Step 2 –Insert the mount arm[02] to base[01]
WARNING:TIGHTENING TORQUE[01-d] BEFORE INSERT THE MOUNT
4
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step 3 –Lcd mornitor assembling
Insert the hand screw [08],through the mount board[01-a] , into the threaded hole in the back
of the monitor and lock it.
Step 4 –Adjusted the rotating friction
As following chart ,adjusting the tightness of head,middle and base location, insert the
attached wrench [0A]into the lock screw to keep proper friction during rotation .
5
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step5 –Cables placement
Route the cables through the clip [02-b] under the arm and [01-c] on the pole
Thank you for purchasing a quality Rosewill Product.
6
|
Quantum Marine Sanitation System 352 User Guide
Radio Shack Conference Phone ET 148 User Guide
RCA Conference Phone 25214 User Guide
Reebok Fitness Home Gym RBE09951 User Guide
Reliable Iron 624HA User Guide
Roberts Radio Portable CD Player SC9911 User Guide
Roberts Radio Portable Radio R9968 User Guide
Sabrent Computer Accessories EC 3US35 User Guide
SECO LARM USA Garage Door Opener SD 961A 36 User Guide
Senco Nail Gun SCN65XP User Guide